NOTE
Follow the instructions on how to flash the device carefully bellow before anything. I will not take responsibility for anything wrong to happen to your device flash at your own risk.
requirement
1.download USB driver here
2.download miracle box flash tool crack here
3.Download SPD UPGRADE tool and learn how to use this tool here
How to flash/unbrick an Itel P13 PLUS
The firmware bellow is in .pac format (after you extract from zip, rar or 7z file) so this means you can flash with Research Download or Upgrade Download tool, Infinity Chinese Miracle II SPD Box, Miracle Box or any other Chinese box or tool which supports flashing in PAC format.
Before flashing, ensure that:
The battery is charged to an extent and inserted into the phone
The phone is powered off / switched off
You have installed Spreadtrum SCI USB drivers
You have downloaded the firmware bellow and copied the .pac file into a folder (ensure to unzip if the PAC file is in a zip, rar or 7z file)
You have a PC and USB
ITEL P13 PLUS
[gsmtzeddy] iTel P13 Plus (P13Plus-F8013-8.1-OP-V014-20180731)
Post a Comment