DOWNLOAD TECNO SPARK K8 STOCK ROM /FIRMWARE

DOWNLOAD TECNO SPARK K8 STOCK ROM /FIRMWARE

Tecno Spark Pro

General Features
 LaunchedAugust 2017
 Operating   SystemAndroid 7.0 Nougat (HiOS Based)
 SIMDual SIM
Display
 TypeIPS HD Touchscreen (2.5D)
 Size5.5 inches
 Resolution1280 x 720 pixels
Body
 Dimension153 x 76.4 x 7.9mm
 ColourChampagne Gold, Metallic Red, Coral Blue, Red
 WeightN/A
Connectivity
 Network3G, 4G LTE
 WLANWiFi 802.11 a/b/g/n
 GPSA-GPS
 USBYes
 BluetoothYes
Storage
 ROM16GB
 RAM1GB/2GB
 Processor1.25GHz Quad-Core Processor
 Card SlotMicroSD, Up to 32GB
 Camera
 Back13MP (Auto-Focus) with LED Flash
 Front8MP with LED and Screen Flash (Mix Flash)
 Battery
 Capacity3000 mAh
Others
 SensorsG-sensor, Ambient Light, Proximity, Fingerprint (Back)

Hardware and Software

The device is powered by MediaTek SoC clocking at 1.25GHz for a smooth ride. The system is also supported by Mali-T720 MP2 and a MediaTek MT6737 processor to deliver smooth performance to users.
The operating system is Android 7.0 Nougat straight from the box with a battery capacity of 3000mAh which is nonremovable and doesn’t support quick charge technology.
For connectivity, the smartphone supports 4G LTE with dual Nano SIM, Bluetooth, micro USB 2.0, and wifi hotspot for wireless connection.

Design

There is nothing really special about this phone in terms of design. It comes with similar features of most budget phones in this category.On the back, the phone is made of plastic which has become the trademark of budget phones. The panel houses a camera accompanied by an LED flash and a fingerprint scanner for security.
You’ll find the Tecno branded logo below the scanner while the dual antenna lines are on the top and bottom of the phone.
It measures 153 x 76.4 x 7.9 mm with the volume rocker and the power buttons slotted on the left side, leaving the right side blank.

display

Talking about the display, Spark Pro K8 features an average screen size. There are bezels both on the top and bottom with the top housing the selfie camera alongside LED flash while the bottom is where the three navigation buttons are located.
The HD IPS display has a screen size of 5.5-inch with a resolution of 1280 X 720 pixels measuring 267 pixels per inch. The phone is available in Champagne Gold, Red, and Blue colors.

follow the instructions on how to flash the device carefully bellow 
I will not take responsibility for anything wrong to happen to your device flash at your own risk. 


requirement

1.Download USB driver here

3.Download sp flash tool and learn how to use sp flash tool  here
  

MediaTek 


The firmware bellow is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box, 
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:
The battery is charged to an extent and inserted into the phone
The phone is powered off / switched off
You have installed MediaTek Preloader USB VCOM drivers
You have downloaded either part of or the complete firmware bellow

DOWNLOAD TECNO SPARK K8 FLASH FILE




Post a Comment

Previous Post Next Post