DOWNLOAD TECNO F3 STOCK ROM/FIRMWARE
The Tecno Pop 1 (F3) comes with a 5.5 inch display and boasts of a 1.3 GHz Quad core Corte1 A53 processor with Android 7.0, Nougat. It also comes with a 1 GB of RAM, an internal memory of either 8 GB. It has a back/ rear camera of 5 MP and a 5 MP front camera with a 2400 mah Li-Po battery capacity to push all this.
The Tecno Pop 1 (F3) comes with a 5.5 inch display and boasts of a 1.3 GHz Quad core Corte1 A53 processor with Android 7.0, Nougat. It also comes with a 1 GB of RAM, an internal memory of either 8 GB. It has a back/ rear camera of 5 MP and a 5 MP front camera with a 2400 mah Li-Po battery capacity to push all this.
Tecno Pop 1 (F3) Key Specs / Features (Specification Highlight)
- Network: 2G – Yes, 3G – Yes , 4G – No
- Operating System: Android 7.0, Nougat
- Processor / GPU: 1.3 GHz Quad-core Cortex A53 / Mali
- Display / Resolution: 5.5 Inches / 960 x 480 pixels
- RAM: 1 GB
- Internal / External Memory: 8 GB / Expandable by up to 32 GB (Uses a dedicated Slot)
- Camera: Back / Rear 5 MP, Front 5 MP
- Battery Capacity: 2400 mAh Li-Po Removable
- Sensors: Accelerometer, Proximity, Light, Compass
- Additional Features:
follow the instructions on how to flash the device carefully bellow
I will not take responsibility for anything wrong to happen to your device flash at your own risk.
requirement
1.Download USB driver here
3.Download sp flash tool and learn how to use sp flash tool here
MediaTek
The firmware bellow is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box,
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:
The battery is charged to an extent and inserted into the phone
The phone is powered off / switched off
You have installed MediaTek Preloader USB VCOM drivers
You have downloaded either part of or the complete firmware bellow
DOWNLOAD TECNO F3 FLASH FILE
Post a Comment