DOWNLOAD TECNO F1 PRO STOCK ROM/FIRMWARE
The Tecno F1 comes with a 5.0-inch display and boasts of a 1.3 GHz Quad-core processor with Android Go. It also comes with a 512 MB of RAM, an internal memory of 8 GB. It has a back/ rear camera of 5 MP and a 2 MP front camera with a 2000mah Li-Po battery capacity to push all this.
GSMTZEDDY
Tecno F1 Specification Highlight (Key Specs)
- Network: 2G – Yes, 3G – Yes, 4G – N/a
- Operating System: Android Go
- Processor / GPU: 1.3 GHz Quad Core Cortex A53 / Mali
- Display / Resolution: 5.0 Inches / 854 x 480 pixel
- RAM: 512 MB
- Internal / External Memory: 8 GB / Expandable by up to 32 GB
- Camera: Back / Rear (5 MP), Front (2 MP)
- Battery Capacity: 2000 mAh Li-Ion
- Sensors: Accelerometer, Proximity, Light, Compass
- Additional Features:
follow the instructions on how to flash the device carefully bellow
I will not take responsibility for anything wrong to happen to your device flash at your own risk.
requirement
1.Download USB driver here
3.Download sp flash tool and learn how to use sp flash tool here
MediaTek
The firmware bellow is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box,
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:
The battery is charged to an extent and inserted into the phone
The phone is powered off / switched off
You have installed MediaTek Preloader USB VCOM drivers
You have downloaded either part of or the complete firmware bellow
DOWNLOAD TECNO F1 PRO FLASH FILE
Post a Comment